A new state of the art meter capable of measuring the moisture content of various substrates using both pad and pin sensors.
In addition there now is a Relative function that can be used to obtain comparative readings above and below a set datum.
A bright traffic light series of LEDs display instant visual information and below this a numerical readout is available for recording specific readings.
Contained within the security case the unit sensor probe is permanently attached to the meter and there are no other costly auxiliary attachments required that can be mislaid or lost.
The unit is contained inside a high visibility Peli security case
|
|
Specifically designed for marine use, including a calibration check facility, with both Deep and Shallow functions for in depth or near surface moisture detection in GRP, or for measuring moisture content in timber.
Air temperature and humidity are automatically compared for Dew Point temperature to be displayed. Spot surface temperature readings can also be taken to warn of potential condensation problems, misleading moisture readings, or unsuitable conditions for commencing coating applications.
Surveyors can establish a datum reading and then select the Comparative function to display readings automatically above or below selected datum, enabling large surface areas to be quickly assessed.
A bright traffic light series of LEDs display instant visual information and below this a numerical readout is available for recording specific readings.
Contained within the security case the unit sensor probe is permanently attached to the meter and there are no other costly auxiliary attachments required that can be mislaid or lost.
The unit is contained inside a high visibility Peli security case. |
|
A new state of the art meter capable of measuring the moisture content of various substrates using both pad and pin sensors.
In addition associated data such as air temperature, relative humidity and spot surface temperature are all available at the touch of a button. This allows the surveyor to diagnose and specifically identify any individual areas within the property at dew point, or close enough to pose a condensation problem.
A bright traffic light series of LEDs display instant visual information and below this a numerical readout is available for recording specific readings.
Contained within the security case the unit sensor probe is permanently attached to the meter and there are no other costly auxiliary attachments required that can be mislaid or lost.
The unit is contained inside a high visibility Peli security case. |
